LOCKING CAPS SW  

LOCKING CAPS SW


Technical Information

RADOLID locking caps
with

  • The locking edge
    catches below the facet, or jams under tension
  • The sealing lip
    type 1 standard for bolted joints WITHOUT washer
    type 2 with lengthened lip to protect washer
    type 3 for two or thicker washers
    type 4 for large diameter washer
  • The circular cross section
    reduces capillary action and compensates hexagon tolerances
  • Different heights
    for longer bolt lengths above the nut or double nuts
Article number:
SW=Width across flats -type- G (Total height inside in mm)
e.g. SW13-2-G14
means:
Locking caps type SW
Width across flats 13 mm - with washer
(type 2)
Total inside hight 14 mm

Technical DataInquiry Now



For hexagon nuts and hexagon bolts

Protection cap with locking edge and sealing lip.

  • different washers can be protected.
  • different heights for longer bolt lengths
    above the nut or double nuts
  • easy assembly by hand or hammer
  • also aviable in imperial sizes (Inch/UNC)


The Locking caps type SW are also available with a fixed elastic sealing lip made of TPE. See caps type ESW.